Texas Instruments AFE79 Series - 2.8.29 Register BCh (offset = BCh) [reset = 0 h]; 2.8.30 Register BDh (offset = BDh) [reset = 0 h]; 2.8.31 Register BEh (offset = BEh) [reset = 0 h]; 2.8.32 Register BFh (offset = BFh) [reset = 0 h]

www.ti.com Macro Register Map
549
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
2.8.29 Register BCh (offset = BCh) [reset = 0h]
Figure 2-960. Register BCh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG7[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-968. Register BC Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG7[7:0]
R/W 0h
Macro operand register # 7. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE
2.8.30 Register BDh (offset = BDh) [reset = 0h]
Figure 2-961. Register BDh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG7[15:8]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-969. Register BD Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG7[15:8]
R/W 0h
Macro operand register # 7. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE
2.8.31 Register BEh (offset = BEh) [reset = 0h]
Figure 2-962. Register BEh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG7[23:16]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-970. Register BE Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG7[23:16]
R/W 0h
Macro operand register # 7. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE
2.8.32 Register BFh (offset = BFh) [reset = 0h]
Figure 2-963. Register BFh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG7[31:24]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset