JESD_SUBCHIP Register Map
www.ti.com
218
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-153. Register BD Field Descriptions (continued)
Bit Field Type Reset Description
2-2
TDD_TX_ON_C_2
T_AB_LINK0_MAS
K
R/W 1h
TDD mask-value for tx_on_a to be set if TXC data comes from
2T_AB instance and link0
0 : mask
1 : tx_on_c
1-1
TDD_TX_ON_B_2
T_AB_LINK0_MAS
K
R/W 1h
TDD mask-value for tx_on_a to be set if TXB data comes from
2T_AB instance and link0
0 : mask
1 : tx_on_b
0-0
TDD_TX_ON_A_2
T_AB_LINK0_MAS
K
R/W 1h
TDD mask-value for tx_on_a to be set if TXA data comes from
2T_AB instance and link0
0 : mask
1 : tx_on_a
2.3.110 Register BEh (offset = BEh) [reset = 4Eh]
Figure 2-151. Register BEh
7 6 5 4 3 2 1 0
TDD_TX_ON_D_2T_CD_MUX_S
EL
TDD_TX_ON_C_2T_CD_MUX_S
EL
TDD_TX_ON_B_2T_CD_MUX_S
EL
TDD_TX_ON_A_2T_CD_MUX_S
EL
R/W-1h R/W-0h R/W-3h R/W-2h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-154. Register BE Field Descriptions
Bit Field Type Reset Description
7-6
TDD_TX_ON_D_2
T_CD_MUX_SEL
R/W 1h
mux select value for tx_on_a to be set if TXD data comes
from 2T_CD instance
0 : tx_on_a
1 : tx_on_b
2 : tx_on_c
3 : tx_on_d
5-4
TDD_TX_ON_C_2
T_CD_MUX_SEL
R/W 0h
mux select value for tx_on_a to be set if TXC data comes
from 2T_CD instance
0 : tx_on_a
1 : tx_on_b
2 : tx_on_c
3 : tx_on_d
3-2
TDD_TX_ON_B_2
T_CD_MUX_SEL
R/W 3h
mux select value for tx_on_a to be set if TXB data comes from
2T_CD instance
0 : tx_on_a
1 : tx_on_b
2 : tx_on_c
3 : tx_on_d
1-0
TDD_TX_ON_A_2
T_CD_MUX_SEL
R/W 2h
mux select value for tx_on_a to be set if TXA data comes from
2T_CD instance
0 : tx_on_a
1 : tx_on_b
2 : tx_on_c
3 : tx_on_d