Texas Instruments AFE79 Series - 2.8.64 Register DFh (offset = DFh) [reset = 0 h]; 2.8.65 Register E0 h (offset = E0 h) [reset = 0 h]; 2.8.66 Register E1 h (offset = E1 h) [reset = 0 h]; 2.8.67 Register E2 h (offset = E2 h) [reset = 0 h]

www.ti.com Macro Register Map
559
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
2.8.64 Register DFh (offset = DFh) [reset = 0h]
Figure 2-995. Register DFh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG15[31:24]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1003. Register DF Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG15[31:24]
R/W 0h
Macro operand register # 15. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.65 Register E0h (offset = E0h) [reset = 0h]
Figure 2-996. Register E0h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG16[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1004. Register E0 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG16[7:0]
R/W 0h
Macro operand register # 16. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.66 Register E1h (offset = E1h) [reset = 0h]
Figure 2-997. Register E1h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG16[15:8]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1005. Register E1 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG16[15:8]
R/W 0h
Macro operand register # 16. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.67 Register E2h (offset = E2h) [reset = 0h]
Figure 2-998. Register E2h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG16[23:16]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset