Texas Instruments AFE79 Series - 2.8.5 Register A4 h (offset = A4 h) [reset = 0 h]; 2.8.6 Register A5 h (offset = A5 h) [reset = 0 h]; 2.8.7 Register A6 h (offset = A6 h) [reset = 0 h]

Macro Register Map www.ti.com
542
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-943. Register A3 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG0[31:24]
R/W 0h
Macro operand register # 0. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE
2.8.5 Register A4h (offset = A4h) [reset = 0h]
Figure 2-936. Register A4h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG1[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-944. Register A4 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG1[7:0]
R/W 0h
Macro operand register # 1. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE
2.8.6 Register A5h (offset = A5h) [reset = 0h]
Figure 2-937. Register A5h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG1[15:8]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-945. Register A5 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG1[15:8]
R/W 0h
Macro operand register # 1. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE
2.8.7 Register A6h (offset = A6h) [reset = 0h]
Figure 2-938. Register A6h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG1[23:16]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-946. Register A6 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG1[23:16]
R/W 0h
Macro operand register # 1. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE