Texas Instruments AFE79 Series - 2.16.227 Register 32 Dh (offset = 32 Dh) [reset = 2 h]; 2.16.228 Register 32 Eh (offset = 32 Eh) [reset = 0 h]; 2.16.229 Register 330 h (offset = 330 h) [reset = 1 h]

www.ti.com IO Wrap Register Map
1063
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-2505. Register 32C Field Descriptions
Bit Field Type Reset Description
2-0
PULL_CTRL_GPIO
_75
R/W 1h
Bit 0 indicates Pull up enable.
Bit <1> Indicates Pull value.
Bit <2> is unused.
2.16.227 Register 32Dh (offset = 32Dh) [reset = 2h]
Figure 2-2490. Register 32Dh
7 6 5 4 3 2 1 0
IBUF_ST_GPIO_75
R/W-2h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2506. Register 32D Field Descriptions
Bit Field Type Reset Description
1-0
IBUF_ST_GPIO_7
5
R/W 2h Input buffer signal strength
2.16.228 Register 32Eh (offset = 32Eh) [reset = 0h]
Figure 2-2491. Register 32Eh
7 6 5 4 3 2 1 0
ODRIV_DS_GPIO_75
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2507. Register 32E Field Descriptions
Bit Field Type Reset Description
1-0
ODRIV_DS_GPIO_
75
R/W 0h output buffer drive strength.
2.16.229 Register 330h (offset = 330h) [reset = 1h]
Figure 2-2492. Register 330h
7 6 5 4 3 2 1 0
PULL_CTRL_GPIO_76
R/W-1h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2508. Register 330 Field Descriptions
Bit Field Type Reset Description
2-0
PULL_CTRL_GPIO
_76
R/W 1h
Bit 0 indicates Pull up enable.
Bit <1> Indicates Pull value.
Bit <2> is unused.