Texas Instruments AFE79 Series - 2.8.61 Register DCh (offset = DCh) [reset = 0 h]; 2.8.62 Register DDh (offset = DDh) [reset = 0 h]; 2.8.63 Register DEh (offset = DEh) [reset = 0 h]

Macro Register Map www.ti.com
558
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-999. Register DB Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG14[31:24]
R/W 0h
Macro operand register # 14. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.61 Register DCh (offset = DCh) [reset = 0h]
Figure 2-992. Register DCh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG15[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1000. Register DC Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG15[7:0]
R/W 0h
Macro operand register # 15. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.62 Register DDh (offset = DDh) [reset = 0h]
Figure 2-993. Register DDh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG15[15:8]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1001. Register DD Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG15[15:8]
R/W 0h
Macro operand register # 15. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.63 Register DEh (offset = DEh) [reset = 0h]
Figure 2-994. Register DEh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG15[23:16]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1002. Register DE Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG15[23:16]
R/W 0h
Macro operand register # 15. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE