Macro Register Map
www.ti.com
562
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-1013. Register E9 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG18[15:8]
R/W 0h
Macro operand register # 18. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.75 Register EAh (offset = EAh) [reset = 0h]
Figure 2-1006. Register EAh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG18[23:16]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1014. Register EA Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG18[23:16]
R/W 0h
Macro operand register # 18. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.76 Register EBh (offset = EBh) [reset = 0h]
Figure 2-1007. Register EBh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG18[31:24]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1015. Register EB Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG18[31:24]
R/W 0h
Macro operand register # 18. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.77 Register ECh (offset = ECh) [reset = 0h]
Figure 2-1008. Register ECh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG19[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1016. Register EC Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG19[7:0]
R/W 0h
Macro operand register # 19. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE