www.ti.com
SERDES Register Map
531
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
2.6.200 Register 7E19h (offset = 7E19h) [reset = 0h]
Figure 2-914. Register 7E19h
7 6 5 4 3 2 1 0
RAM_ADDRESS_HIGH[15:8]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-920. Register 7E19 Field Descriptions
Bit Field Type Reset Description
7-0
RAM_ADDRESS_
HIGH[15:8]
R/W 0h
RAM_ADDRESS[31:16]
When this register is used for eye diagram data, access is
read only and the value depends on the data written to the
register.
2.6.201 Register 7E1Ah (offset = 7E1Ah) [reset = 0h]
Figure 2-915. Register 7E1Ah
7 6 5 4 3 2 1 0
RAM_ADDRESS_LOW[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-921. Register 7E1A Field Descriptions
Bit Field Type Reset Description
7-0
RAM_ADDRESS_L
OW[7:0]
R/W 0h
RAM_ADDRESS[15:0]
When this register is used for eye diagram data, access is
read only and the value depends on the data written to the
register.
2.6.202 Register 7E1Bh (offset = 7E1Bh) [reset = 0h]
Figure 2-916. Register 7E1Bh
7 6 5 4 3 2 1 0
RAM_ADDRESS_LOW[15:8]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-922. Register 7E1B Field Descriptions
Bit Field Type Reset Description
7-0
RAM_ADDRESS_L
OW[15:8]
R/W 0h
RAM_ADDRESS[15:0]
When this register is used for eye diagram data, access is
read only and the value depends on the data written to the
register.