Texas Instruments AFE79 Series - 2.8.47 Register CEh (offset = CEh) [reset = 0 h]; 2.8.48 Register CFh (offset = CFh) [reset = 0 h]; 2.8.49 Register D0 h (offset = D0 h) [reset = 0 h]

Macro Register Map www.ti.com
554
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-985. Register CD Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG11[15:8]
R/W 0h
Macro operand register # 11. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.47 Register CEh (offset = CEh) [reset = 0h]
Figure 2-978. Register CEh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG11[23:16]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-986. Register CE Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG11[23:16]
R/W 0h
Macro operand register # 11. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.48 Register CFh (offset = CFh) [reset = 0h]
Figure 2-979. Register CFh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG11[31:24]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-987. Register CF Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG11[31:24]
R/W 0h
Macro operand register # 11. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.49 Register D0h (offset = D0h) [reset = 0h]
Figure 2-980. Register D0h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG12[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-988. Register D0 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG12[7:0]
R/W 0h
Macro operand register # 12. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE