Texas Instruments AFE79 Series - 2.8.157 Register 13 Ch (offset = 13 Ch) [reset = 0 h]; 2.8.158 Register 13 Dh (offset = 13 Dh) [reset = 0 h]; 2.8.159 Register 13 Eh (offset = 13 Eh) [reset = 0 h]; 2.8.160 Register 13 Fh (offset = 13 Fh) [reset = 0 h]

Macro Register Map www.ti.com
586
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
2.8.157 Register 13Ch (offset = 13Ch) [reset = 0h]
Figure 2-1088. Register 13Ch
7 6 5 4 3 2 1 0
MACRO_RESULT_REG17[7:0]
R-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1096. Register 13C Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_RESULT_
REG17[7:0]
R 0h
Macro result register # 17. Interpretation of the contents of this
register depend on the last macro command
2.8.158 Register 13Dh (offset = 13Dh) [reset = 0h]
Figure 2-1089. Register 13Dh
7 6 5 4 3 2 1 0
MACRO_RESULT_REG17[15:8]
R-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1097. Register 13D Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_RESULT_
REG17[15:8]
R 0h
Macro result register # 17. Interpretation of the contents of this
register depend on the last macro command
2.8.159 Register 13Eh (offset = 13Eh) [reset = 0h]
Figure 2-1090. Register 13Eh
7 6 5 4 3 2 1 0
MACRO_RESULT_REG17[23:16]
R-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1098. Register 13E Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_RESULT_
REG17[23:16]
R 0h
Macro result register # 17. Interpretation of the contents of this
register depend on the last macro command
2.8.160 Register 13Fh (offset = 13Fh) [reset = 0h]
Figure 2-1091. Register 13Fh
7 6 5 4 3 2 1 0
MACRO_RESULT_REG17[31:24]
R-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset