Texas Instruments AFE79 Series - 2.8.12 Register ABh (offset = ABh) [reset = 0 h]; 2.8.13 Register ACh (offset = ACh) [reset = 0 h]; 2.8.14 Register ADh (offset = ADh) [reset = 0 h]

Macro Register Map www.ti.com
544
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-950. Register AA Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG2[23:16]
R/W 0h
Macro operand register # 2. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE
2.8.12 Register ABh (offset = ABh) [reset = 0h]
Figure 2-943. Register ABh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG2[31:24]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-951. Register AB Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG2[31:24]
R/W 0h
Macro operand register # 2. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE
2.8.13 Register ACh (offset = ACh) [reset = 0h]
Figure 2-944. Register ACh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG3[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-952. Register AC Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG3[7:0]
R/W 0h
Macro operand register # 3. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE
2.8.14 Register ADh (offset = ADh) [reset = 0h]
Figure 2-945. Register ADh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG3[15:8]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-953. Register AD Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG3[15:8]
R/W 0h
Macro operand register # 3. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE