Texas Instruments AFE79 Series - 2.8.57 Register D8 h (offset = D8 h) [reset = 0 h]; 2.8.58 Register D9 h (offset = D9 h) [reset = 0 h]; 2.8.59 Register DAh (offset = DAh) [reset = 0 h]; 2.8.60 Register DBh (offset = DBh) [reset = 0 h]

www.ti.com Macro Register Map
557
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
2.8.57 Register D8h (offset = D8h) [reset = 0h]
Figure 2-988. Register D8h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG14[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-996. Register D8 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG14[7:0]
R/W 0h
Macro operand register # 14. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.58 Register D9h (offset = D9h) [reset = 0h]
Figure 2-989. Register D9h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG14[15:8]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-997. Register D9 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG14[15:8]
R/W 0h
Macro operand register # 14. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.59 Register DAh (offset = DAh) [reset = 0h]
Figure 2-990. Register DAh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG14[23:16]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-998. Register DA Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG14[23:16]
R/W 0h
Macro operand register # 14. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.60 Register DBh (offset = DBh) [reset = 0h]
Figure 2-991. Register DBh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG14[31:24]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset