Texas Instruments AFE79 Series - 2.8.68 Register E3 h (offset = E3 h) [reset = 0 h]; 2.8.69 Register E4 h (offset = E4 h) [reset = 0 h]; 2.8.70 Register E5 h (offset = E5 h) [reset = 0 h]

Macro Register Map www.ti.com
560
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-1006. Register E2 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG16[23:16]
R/W 0h
Macro operand register # 16. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.68 Register E3h (offset = E3h) [reset = 0h]
Figure 2-999. Register E3h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG16[31:24]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1007. Register E3 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG16[31:24]
R/W 0h
Macro operand register # 16. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.69 Register E4h (offset = E4h) [reset = 0h]
Figure 2-1000. Register E4h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG17[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1008. Register E4 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG17[7:0]
R/W 0h
Macro operand register # 17. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.70 Register E5h (offset = E5h) [reset = 0h]
Figure 2-1001. Register E5h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG17[15:8]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1009. Register E5 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG17[15:8]
R/W 0h
Macro operand register # 17. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE