IO Wrap Register Map
www.ti.com
1148
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
2.16.452 Register 865h (offset = 865h) [reset = 2h]
Figure 2-2715. Register 865h
7 6 5 4 3 2 1 0
OVR_SEL_INT
PI_RXB_DSA_
GAIN_0
OVR_INTPI_R
XB_DSA_GAIN
_0
R/W-1h R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2731. Register 865 Field Descriptions
Bit Field Type Reset Description
1-1
OVR_SEL_INTPI_
RXB_DSA_GAIN_0
R/W 1h
control to select whether the input function
intpi_rxb_dsa_gain_0 needs to be overriden ot not. 1 indicates
override.
0-0
OVR_INTPI_RXB_
DSA_GAIN_0
R/W 0h override value for ovr_sel_intpi_rxb_dsa_gain_0 is made high
2.16.453 Register 868h (offset = 868h) [reset = 0h]
Figure 2-2716. Register 868h
7 6 5 4 3 2 1 0
SEL_INTPI_RXB_DSA_GAIN_1 POL_INTPI_RX
B_DSA_GAIN_
1
R/W-0h R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2732. Register 868 Field Descriptions
Bit Field Type Reset Description
2-1
SEL_INTPI_RXB_
DSA_GAIN_1
R/W 0h
select control for intpi_rxb_dsa_gain_1. 0 indicates take from
parallel GPIO 1 indicates take from Serial LVDS GPIO 2
indicates take from Serdes GPIO
0-0
POL_INTPI_RXB_
DSA_GAIN_1
R/W 0h
polarity control for intpi_rxb_dsa_gain_1. 0 indicates pass
through from GPIO when selected 1 indicates inverted signal
2.16.454 Register 869h (offset = 869h) [reset = 2h]
Figure 2-2717. Register 869h
7 6 5 4 3 2 1 0
OVR_SEL_INT
PI_RXB_DSA_
GAIN_1
OVR_INTPI_R
XB_DSA_GAIN
_1
R/W-1h R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2733. Register 869 Field Descriptions
Bit Field Type Reset Description
1-1
OVR_SEL_INTPI_
RXB_DSA_GAIN_1
R/W 1h
control to select whether the input function
intpi_rxb_dsa_gain_1 needs to be overriden ot not. 1 indicates
override.
0-0
OVR_INTPI_RXB_
DSA_GAIN_1
R/W 0h override value for ovr_sel_intpi_rxb_dsa_gain_1 is made high
To Next Page
Loading...
Need help?
General
