TX Top Register Map
www.ti.com
680
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-1365. Register 557 Field Descriptions
Bit Field Type Reset Description
3-0
TX_PAP_OVER_R
ANGE_ERROR_T
HRESHOLD[11:8]
R/W 0h Saturation error counter threshold. Values from 0 to 2^12-1
2.12.151 Register 558h (offset = 558h) [reset = 0h]
Figure 2-1354. Register 558h
7 6 5 4 3 2 1 0
TX_PAP_ALARM_STATUS
R-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1366. Register 558 Field Descriptions
Bit Field Type Reset Description
4-0
TX_PAP_ALARM_
STATUS
R 0h
Masked Alarm status bits of PAP final alarm to GPIO. Value 1
= Triggered, Value 0 = NoTrigger.
bit [0] :TxA Alarm
bit [1]: TxB Alarm
bit [2]: TxC Alarm
bit [3]: TxD Alarm
bit [4]: Reserved
2.12.152 Register 559h (offset = 559h) [reset = 0h]
Figure 2-1355. Register 559h
7 6 5 4 3 2 1 0
TX_PAP_UNMASK_STATUS
R-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1367. Register 559 Field Descriptions
Bit Field Type Reset Description
4-0
TX_PAP_UNMASK
_STATUS
R 0h
Unmasked Alarm status bits of PAP final alarm to GPIO.
Value 1 = Triggered, Value 0 = NoTrigger.
bit [0] :TxA Alarm
bit [1]: TxB Alarm
bit [2]: TxC Alarm
bit [3]: TxD Alarm
bit [4]: Reserved
2.12.153 Register 55Ch (offset = 55Ch) [reset = 0h]
Figure 2-1356. Register 55Ch
7 6 5 4 3 2 1 0
TX_PAP_OTHER_TX_PAP_ALARM_STATUS[7:0]
R-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset