Texas Instruments AFE79 Series User Manual

SERDES Register Map www.ti.com
522
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-893. Register 7035 Field Descriptions
Bit Field Type Reset Description
7-0
ROM_BIST_OUT_
LSB[15:8]
R 0h ROM BIST test result (MSB) bits 15:0.
2.6.174 Register 7037h (offset = 7037h) [reset = 0h]
Figure 2-888. Register 7037h
7 6 5 4 3 2 1 0
SIG_DET_LAN
E0_OW_EN
SIG_DET_LAN
E0_OW_VAL
SIG_DET_LAN
E1_OW_EN
SIG_DET_LAN
E1_OW_VAL
SIG_DET_LAN
E2_OW_EN
SIG_DET_LAN
E2_OW_VAL
SIG_DET_LAN
E3_OW_EN
SIG_DET_LAN
E3_OW_VAL
R/W-0h R/W-0h R/W-0h R/W-0h R/W-0h R/W-0h R/W-0h R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-894. Register 7037 Field Descriptions
Bit Field Type Reset Description
7-7
SIG_DET_LANE0_
OW_EN
R/W 0h Enable lane 0 signal detect overwrite.
6-6
SIG_DET_LANE0_
OW_VAL
R/W 0h Lane 0 signal detect overwrite.
5-5
SIG_DET_LANE1_
OW_EN
R/W 0h Enable lane 1 signal detect overwrite.
4-4
SIG_DET_LANE1_
OW_VAL
R/W 0h Lane 1 signal detect overwrite.
3-3
SIG_DET_LANE2_
OW_EN
R/W 0h Enable lane 2 signal detect overwrite.
2-2
SIG_DET_LANE2_
OW_VAL
R/W 0h Lane 2 signal detect overwrite.
1-1
SIG_DET_LANE3_
OW_EN
R/W 0h Enable lane 3 signal detect overwrite.
0-0
SIG_DET_LANE3_
OW_VAL
R/W 0h Lane 3 signal detect overwrite.
2.6.175 Register 7E00h (offset = 7E00h) [reset = 0h]
Figure 2-889. Register 7E00h
7 6 5 4 3 2 1 0
FIRMWARE_DATA0[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-895. Register 7E00 Field Descriptions
Bit Field Type Reset Description
7-0
FIRMWARE_DATA
0[7:0]
R/W 0h
Firmware word holding register.
When this register is used for eye diagram data, access is
read only and the value depends on the data written to the
register.

Texas Instruments AFE79 Series Specifications

General

Brand	Texas Instruments
Model	AFE79 Series
Category	Control Unit
Language	English