EasyManua.ls Logo

Texas Instruments AFE79 Series - 2.12.116 Register 51 Dh (offset = 51 Dh) [reset = 0 h]; 2.12.117 Register 51 Eh (offset = 51 Eh) [reset = 0 h]; 2.12.118 Register 520 h (offset = 520 h) [reset = 0 h]

Texas Instruments AFE79 Series
1268 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.ti.com
TX Top Register Map
669
SBAU337May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-1330. Register 51C Field Descriptions
Bit Field Type Reset Description
0-0
TX_DUAL_BAND_
COMBINER_PAP_
PWR_METER_EN
R/W 0h
For debug, a power meter at dual band combiner. The power
meter measures the RMS power in a window. The length of
the window is programmed in the register
tx_dual_band_combiner_pap_pwr_meter_window_counter.
This regsiter controls the dual band combiner power meter
enable
0 : Disable
1 : Enable
2.12.116 Register 51Dh (offset = 51Dh) [reset = 0h]
Figure 2-1319. Register 51Dh
7 6 5 4 3 2 1 0
TX_DUAL_BAN
D_COMBINER
_PAP_PWR_M
ETER_CAPTU
RE
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1331. Register 51D Field Descriptions
Bit Field Type Reset Description
0-0
TX_DUAL_BAND_
COMBINER_PAP_
PWR_METER_CA
PTURE
R/W 0h
Dynamic power calculation capture signal for the power meter
at dual band combiner. 0->1->0 transition captures power
estimation data.
2.12.117 Register 51Eh (offset = 51Eh) [reset = 0h]
Figure 2-1320. Register 51Eh
7 6 5 4 3 2 1 0
TX_DUAL_BAND_COMBINER_PAP_POWER_BIAS
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1332. Register 51E Field Descriptions
Bit Field Type Reset Description
7-0
TX_DUAL_BAND_
COMBINER_PAP_
POWER_BIAS
R/W 0h Unused
2.12.118 Register 520h (offset = 520h) [reset = 0h]
Figure 2-1321. Register 520h
7 6 5 4 3 2 1 0
TX_DUAL_BAND_COMBINER_PAP_PWR_METER_WINDOW_COUNTER[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset

Table of Contents

Related product manuals