Texas Instruments AFE79 Series - 2.12.44 Register 206 h (offset = 206 h) [reset = 0 h]; 2.12.45 Register 207 h (offset = 207 h) [reset = 0 h]; 2.12.46 Register 210 h (offset = 210 h) [reset = 0 h]

www.ti.com TX Top Register Map
645
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
2.12.44 Register 206h (offset = 206h) [reset = 0h]
Figure 2-1247. Register 206h
7 6 5 4 3 2 1 0
TX_DUC_BAND1_MIXER1_NCO1_FCW[23:16]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1259. Register 206 Field Descriptions
Bit Field Type Reset Description
7-0
TX_DUC_BAND1_
MIXER1_NCO1_F
CW[23:16]
R/W 0h
Mixer 1 Frequency control word (FCW) for nco1 of Band1.
The System Configuration Macros automatically and optimally
partition the overall center frequency between Mixer1 and
Mixer2, and are hence strongly recommended.
2.12.45 Register 207h (offset = 207h) [reset = 0h]
Figure 2-1248. Register 207h
7 6 5 4 3 2 1 0
TX_DUC_BAND1_MIXER1_NCO1_FCW[31:24]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1260. Register 207 Field Descriptions
Bit Field Type Reset Description
7-0
TX_DUC_BAND1_
MIXER1_NCO1_F
CW[31:24]
R/W 0h
Mixer 1 Frequency control word (FCW) for nco1 of Band1.
The System Configuration Macros automatically and optimally
partition the overall center frequency between Mixer1 and
Mixer2, and are hence strongly recommended.
2.12.46 Register 210h (offset = 210h) [reset = 0h]
Figure 2-1249. Register 210h
7 6 5 4 3 2 1 0
TX_DUC_BAND1_MIXER1_NCO0_PHASE_OFFSET[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1261. Register 210 Field Descriptions
Bit Field Type Reset Description
7-0
TX_DUC_BAND1_
MIXER1_NCO0_P
HASE_OFFSET[7:
0]
R/W 0h Offset phase for nco0 of Band1 in Mixer 1