Texas Instruments AFE79 Series User Manual

www.ti.com IO Wrap Register Map
1069
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
2.16.246 Register 40Bh (offset = 40Bh) [reset = 0h]
Figure 2-2509. Register 40Bh
7 6 5 4 3 2 1 0
ACTIV_BIR_DIR_CTRL_GPIO_2 reserved
R/W-0h R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2525. Register 40B Field Descriptions
Bit Field Type Reset Description
3-1
ACTIV_BIR_DIR_C
TRL_GPIO_2
R/W 0h
Control to indicate whether the GPIO_2 needs dynamic ouptu
t enabling.
0 to 3 --> Static direction
4 --> Use the IO for 3 pin SPI B2 SDIO.
5 --> Use the IO for 4 pin SPI B2 SDO
6 --> Use the IO for 3 pin SPI B1 SDIO.
7 --> use the IO for 4 pin SPI B1 SDO.
0-0 reserved R/W 0h
2.16.247 Register 40Ch (offset = 40Ch) [reset = 1h]
Figure 2-2510. Register 40Ch
7 6 5 4 3 2 1 0
reserved reserved BUF_DIR_CTRL_GPIO_3
R/W-0h R/W-0h R/W-1h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2526. Register 40C Field Descriptions
Bit Field Type Reset Description
7-5 reserved R/W 0h
4-2 reserved R/W 0h
1-0
BUF_DIR_CTRL_G
PIO_3
R/W 1h
Controls the direction of GPIO
0 both input and output are not selected.. can be used for
analog
1 input mode
2 output mode
3 shouldnt be used
2.16.248 Register 40Fh (offset = 40Fh) [reset = 0h]
Figure 2-2511. Register 40Fh
7 6 5 4 3 2 1 0
ACTIV_BIR_DIR_CTRL_GPIO_3 reserved
R/W-0h R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset

Texas Instruments AFE79 Series Specifications

General

Brand	Texas Instruments
Model	AFE79 Series
Category	Control Unit
Language	English