www.ti.com
RX Top Register Map
739
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-1515. Register 422 Field Descriptions
Bit Field Type Reset Description
7-0
RX_AGC_SMALL_
STEP_DECAY_WI
N_LEN[23:16]
R/W 0h
Digital small step decay det window length. Max supported
length is 2^24 - 2.
2.13.91 Register 424h (offset = 424h) [reset = 9h]
Figure 2-1503. Register 424h
7 6 5 4 3 2 1 0
RX_AGC_PWR_DET_ATTACK_WIN_LEN
R/W-9h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1516. Register 424 Field Descriptions
Bit Field Type Reset Description
4-0
RX_AGC_PWR_D
ET_ATTACK_WIN
_LEN
R/W 9h
Power detector attack window length. Actual window length
used is 2 power programmed value. Max supported length is
2^23 (programmed value 23)
2.13.92 Register 425h (offset = 425h) [reset = Fh]
Figure 2-1504. Register 425h
7 6 5 4 3 2 1 0
RX_AGC_PWRDET_DECAY_WIN_LEN
R/W-Fh
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1517. Register 425 Field Descriptions
Bit Field Type Reset Description
4-0
RX_AGC_PWRDE
T_DECAY_WIN_L
EN
R/W Fh
Power detector decay window length. Actual window length
used is 2 power programmed value. Max supported length is
2^23 (programmed value 23)
2.13.93 Register 428h (offset = 428h) [reset = 0h]
Figure 2-1505. Register 428h
7 6 5 4 3 2 1 0
RX_AGC_LNA_RF_DET_ATTACK_WIN_LEN[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1518. Register 428 Field Descriptions
Bit Field Type Reset Description
7-0
RX_AGC_LNA_RF
_DET_ATTACK_W
IN_LEN[7:0]
R/W 0h
LNA RF attack det window length. Max supported length is
2^24 - 2.