Texas Instruments AFE79 Series - 2.16.178 Register 2 ECh (offset = 2 ECh) [reset = 1 h]; 2.16.179 Register 2 EDh (offset = 2 EDh) [reset = 2 h]; 2.16.180 Register 2 EEh (offset = 2 EEh) [reset = 0 h]

www.ti.com IO Wrap Register Map
1049
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-2456. Register 2EA Field Descriptions
Bit Field Type Reset Description
1-0
ODRIV_DS_GPIO_
58
R/W 0h output buffer drive strength.
2.16.178 Register 2ECh (offset = 2ECh) [reset = 1h]
Figure 2-2441. Register 2ECh
7 6 5 4 3 2 1 0
PULL_CTRL_GPIO_59
R/W-1h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2457. Register 2EC Field Descriptions
Bit Field Type Reset Description
2-0
PULL_CTRL_GPIO
_59
R/W 1h
Bit 0 indicates Pull up enable.
Bit <1> Indicates Pull value.
Bit <2> is unused.
2.16.179 Register 2EDh (offset = 2EDh) [reset = 2h]
Figure 2-2442. Register 2EDh
7 6 5 4 3 2 1 0
IBUF_ST_GPIO_59
R/W-2h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2458. Register 2ED Field Descriptions
Bit Field Type Reset Description
1-0
IBUF_ST_GPIO_5
9
R/W 2h Input buffer signal strength
2.16.180 Register 2EEh (offset = 2EEh) [reset = 0h]
Figure 2-2443. Register 2EEh
7 6 5 4 3 2 1 0
ODRIV_DS_GPIO_59
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2459. Register 2EE Field Descriptions
Bit Field Type Reset Description
1-0
ODRIV_DS_GPIO_
59
R/W 0h output buffer drive strength.