EasyManua.ls Logo

Texas Instruments AFE79 Series - 2.3.71 Register 81 h (offset = 81 h) [reset = 3 h]; 2.3.72 Register 82 h (offset = 82 h) [reset = 4 h]

Texas Instruments AFE79 Series
1268 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
JESD_SUBCHIP Register Map
www.ti.com
200
SBAU337May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-114. Register 7E Field Descriptions
Bit Field Type Reset Description
3-2
LP_FB_ON_C_SE
L_2R1F_AB_MAS
K
R/W 2h
Its a bit mask, used to compute sig-valid as a combination of
fb_on a and c. Used to gate 4 streams of 16b data i.e. output
of 2F mux for 2R1F_AB inst. So, based on the data mux
settings, this mask should be chosen.
11 -> uses or'ed fb_on c,a
01 -> uses or'ed fb_on a
00 -> uses zero
1-0
LP_FB_ON_A_SEL
_2R1F_AB_MASK
R/W 1h
Its a bit mask, used to compute sig-valid as a combination of
fb_on a and c. Used to gate 4 streams of 16b data i.e. output
of 2F mux for 2R1F_AB inst. So, based on the data mux
settings, this mask should be chosen.
11 -> uses or'ed fb_on c,a
01 -> uses or'ed fb_on a
00 -> uses zero
2.3.71 Register 81h (offset = 81h) [reset = 3h]
Figure 2-112. Register 81h
7 6 5 4 3 2 1 0
LP_RX_ON_D_SEL_2R1F_CD_MASK LP_RX_ON_C_SEL_2R1F_CD_MASK
R/W-0h R/W-3h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-115. Register 81 Field Descriptions
Bit Field Type Reset Description
7-4
LP_RX_ON_D_SE
L_2R1F_CD_MAS
K
R/W 0h
FOR LOW POWER CONSUMPTION:
Its a bit mask, used to compute sig-valid as a combination of
rx_on b,a,d,c. Used to gate 4 streams of 16b data i.e. output
of 4R mux for 2R1F_CD inst. So, based on the data mux
settings, this mask should be chosen.
1111 - Uses or'ed rx_on b,a,d,c
0111 - Uses or'ed rx_on a,d,c
0011 - Uses or'ed rx_on d,c
0001 - Uses or'ed rx_on c
0000 - Uses zero
3-0
LP_RX_ON_C_SE
L_2R1F_CD_MAS
K
R/W 3h
FOR LOW POWER CONSUMPTION:
Its a bit mask, used to compute sig-valid as a combination of
rx_on b,a,d,c. Used to gate 4 streams of 16b data i.e. output
of 4R mux for 2R1F_CD inst. So, based on the data mux
settings, this mask should be chosen.
1111 - Uses or'ed rx_on b,a,d,c
0111 - Uses or'ed rx_on a,d,c
0011 - Uses or'ed rx_on d,c
0001 - Uses or'ed rx_on c
0000 - Uses zero
2.3.72 Register 82h (offset = 82h) [reset = 4h]
Figure 2-113. Register 82h
7 6 5 4 3 2 1 0
LP_FB_ON_C_SEL_2R1F_CD_
MASK
LP_FB_ON_A_SEL_2R1F_CD_
MASK
R/W-1h R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset

Table of Contents

Related product manuals