Texas Instruments AFE79 Series - 2.8.26 Register B9 h (offset = B9 h) [reset = 0 h]; 2.8.27 Register BAh (offset = BAh) [reset = 0 h]; 2.8.28 Register BBh (offset = BBh) [reset = 0 h]

Macro Register Map www.ti.com
548
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-964. Register B8 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG6[7:0]
R/W 0h
Macro operand register # 6. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE
2.8.26 Register B9h (offset = B9h) [reset = 0h]
Figure 2-957. Register B9h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG6[15:8]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-965. Register B9 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG6[15:8]
R/W 0h
Macro operand register # 6. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE
2.8.27 Register BAh (offset = BAh) [reset = 0h]
Figure 2-958. Register BAh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG6[23:16]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-966. Register BA Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG6[23:16]
R/W 0h
Macro operand register # 6. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE
2.8.28 Register BBh (offset = BBh) [reset = 0h]
Figure 2-959. Register BBh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG6[31:24]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-967. Register BB Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG6[31:24]
R/W 0h
Macro operand register # 6. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE