Texas Instruments AFE79 Series - 2.8.15 Register AEh (offset = AEh) [reset = 0 h]; 2.8.16 Register AFh (offset = AFh) [reset = 0 h]; 2.8.17 Register B0 h (offset = B0 h) [reset = 0 h]; 2.8.18 Register B1 h (offset = B1 h) [reset = 0 h]

www.ti.com Macro Register Map
545
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
2.8.15 Register AEh (offset = AEh) [reset = 0h]
Figure 2-946. Register AEh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG3[23:16]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-954. Register AE Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG3[23:16]
R/W 0h
Macro operand register # 3. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE
2.8.16 Register AFh (offset = AFh) [reset = 0h]
Figure 2-947. Register AFh
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG3[31:24]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-955. Register AF Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG3[31:24]
R/W 0h
Macro operand register # 3. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE
2.8.17 Register B0h (offset = B0h) [reset = 0h]
Figure 2-948. Register B0h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG4[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-956. Register B0 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG4[7:0]
R/W 0h
Macro operand register # 4. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE
2.8.18 Register B1h (offset = B1h) [reset = 0h]
Figure 2-949. Register B1h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG4[15:8]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset