Texas Instruments AFE79 Series - 2.8.40 Register C7 h (offset = C7 h) [reset = 0 h]; 2.8.41 Register C8 h (offset = C8 h) [reset = 0 h]; 2.8.42 Register C9 h (offset = C9 h) [reset = 0 h]

Macro Register Map www.ti.com
552
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-978. Register C6 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG9[23:16]
R/W 0h
Macro operand register # 9. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE
2.8.40 Register C7h (offset = C7h) [reset = 0h]
Figure 2-971. Register C7h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG9[31:24]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-979. Register C7 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG9[31:24]
R/W 0h
Macro operand register # 9. Interpretation of the operand(s) in
this register are dependent on MACRO_OPCODE
2.8.41 Register C8h (offset = C8h) [reset = 0h]
Figure 2-972. Register C8h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG10[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-980. Register C8 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG10[7:0]
R/W 0h
Macro operand register # 10. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.42 Register C9h (offset = C9h) [reset = 0h]
Figure 2-973. Register C9h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG10[15:8]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-981. Register C9 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG10[15:8]
R/W 0h
Macro operand register # 10. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE