Texas Instruments AFE79 Series - 2.8.54 Register D5 h (offset = D5 h) [reset = 0 h]; 2.8.55 Register D6 h (offset = D6 h) [reset = 0 h]; 2.8.56 Register D7 h (offset = D7 h) [reset = 0 h]

Macro Register Map www.ti.com
556
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-992. Register D4 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG13[7:0]
R/W 0h
Macro operand register # 13. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.54 Register D5h (offset = D5h) [reset = 0h]
Figure 2-985. Register D5h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG13[15:8]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-993. Register D5 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG13[15:8]
R/W 0h
Macro operand register # 13. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.55 Register D6h (offset = D6h) [reset = 0h]
Figure 2-986. Register D6h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG13[23:16]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-994. Register D6 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG13[23:16]
R/W 0h
Macro operand register # 13. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE
2.8.56 Register D7h (offset = D7h) [reset = 0h]
Figure 2-987. Register D7h
7 6 5 4 3 2 1 0
MACRO_OPERAND_REG13[31:24]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-995. Register D7 Field Descriptions
Bit Field Type Reset Description
7-0
MACRO_OPERAN
D_REG13[31:24]
R/W 0h
Macro operand register # 13. Interpretation of the operand(s)
in this register are dependent on MACRO_OPCODE