Texas Instruments AFE79 Series - 2.12.145 Register 54 Fh (offset = 54 Fh) [reset = 6 h]; 2.12.146 Register 550 h (offset = 550 h) [reset = 0 h]

TX Top Register Map www.ti.com
678
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-1359. Register 54E Field Descriptions
Bit Field Type Reset Description
7-0
TX_PAP_OTHER_
TX_PAP_ALARM_
MASK[7:0]
R/W 1Bh
Mask PAP TxA input & detection alarms. Value 1 = Mask,
Value 0 = NoMask.
bit [0] :PLL Alarm
bit [5]: JESD Serdes Alarm
bit [6]: Async FIFO Overflow Alarm
bit [7]: Saturation Overflow Alarm
bit [8]: Dual/Single band Alarm
bit [9]: PAP dual band combiner alarm
bit[10]: FW/SPI triggered alarm
Remaining: Unused
2.12.145 Register 54Fh (offset = 54Fh) [reset = 6h]
Figure 2-1348. Register 54Fh
7 6 5 4 3 2 1 0
TX_PAP_OTHER_TX_PAP_ALARM_MASK[10:8]
R/W-6h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1360. Register 54F Field Descriptions
Bit Field Type Reset Description
2-0
TX_PAP_OTHER_
TX_PAP_ALARM_
MASK[10:8]
R/W 6h
Mask PAP TxA input & detection alarms. Value 1 = Mask,
Value 0 = NoMask.
bit [0] :PLL Alarm
bit [5]: JESD Serdes Alarm
bit [6]: Async FIFO Overflow Alarm
bit [7]: Saturation Overflow Alarm
bit [8]: Dual/Single band Alarm
bit [9]: PAP dual band combiner alarm
bit[10]: FW/SPI triggered alarm
Remaining: Unused
2.12.146 Register 550h (offset = 550h) [reset = 0h]
Figure 2-1349. Register 550h
7 6 5 4 3 2 1 0
TX_PAP_EN_O
VER_RANGE_
WIND_COUNT
ER
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1361. Register 550 Field Descriptions
Bit Field Type Reset Description
0-0
TX_PAP_EN_OVE
R_RANGE_WIND_
COUNTER
R/W 0h
PAP can also be triggered based on saturation of signal in the
Tx digital datapath. Enable saturation or overranging based
PAP trigger.
0:Disable:
1:Enable: