Texas Instruments AFE79 Series - 2.16.157 Register 2 D0 h (offset = 2 D0 h) [reset = 1 h]; 2.16.158 Register 2 D1 h (offset = 2 D1 h) [reset = 2 h]; 2.16.159 Register 2 D2 h (offset = 2 D2 h) [reset = 0 h]

www.ti.com IO Wrap Register Map
1043
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-2435. Register 2CE Field Descriptions
Bit Field Type Reset Description
1-0
ODRIV_DS_GPIO_
51
R/W 0h output buffer drive strength.
2.16.157 Register 2D0h (offset = 2D0h) [reset = 1h]
Figure 2-2420. Register 2D0h
7 6 5 4 3 2 1 0
PULL_CTRL_GPIO_52
R/W-1h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2436. Register 2D0 Field Descriptions
Bit Field Type Reset Description
2-0
PULL_CTRL_GPIO
_52
R/W 1h
Bit 0 indicates Pull up enable.
Bit <1> Indicates Pull value.
Bit <2> is unused.
2.16.158 Register 2D1h (offset = 2D1h) [reset = 2h]
Figure 2-2421. Register 2D1h
7 6 5 4 3 2 1 0
IBUF_ST_GPIO_52
R/W-2h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2437. Register 2D1 Field Descriptions
Bit Field Type Reset Description
1-0
IBUF_ST_GPIO_5
2
R/W 2h Input buffer signal strength
2.16.159 Register 2D2h (offset = 2D2h) [reset = 0h]
Figure 2-2422. Register 2D2h
7 6 5 4 3 2 1 0
ODRIV_DS_GPIO_52
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2438. Register 2D2 Field Descriptions
Bit Field Type Reset Description
1-0
ODRIV_DS_GPIO_
52
R/W 0h output buffer drive strength.