Texas Instruments AFE79 Series - 2.6.44 Register 407 Ah (offset = 407 Ah) [reset = 30 h]; 2.6.45 Register 407 Bh (offset = 407 Bh) [reset = 0 h]; 2.6.46 Register 407 Ch (offset = 407 Ch) [reset = D0 h]

SERDES Register Map www.ti.com
480
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-763. Register 4079 Field Descriptions
Bit Field Type Reset Description
2-0
LINK_INIT_VAL_2[
10:8]
R/W 0h Initial parameter set values 2. Used during link-up.
2.6.44 Register 407Ah (offset = 407Ah) [reset = 30h]
Figure 2-758. Register 407Ah
7 6 5 4 3 2 1 0
LINK_INIT_VAL_3[7:0]
R/W-30h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-764. Register 407A Field Descriptions
Bit Field Type Reset Description
7-0
LINK_INIT_VAL_3[
7:0]
R/W 30h Initial parameter set values 3 Used during link-up.
2.6.45 Register 407Bh (offset = 407Bh) [reset = 0h]
Figure 2-759. Register 407Bh
7 6 5 4 3 2 1 0
LINK_INIT_VAL_3[10:8]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-765. Register 407B Field Descriptions
Bit Field Type Reset Description
2-0
LINK_INIT_VAL_3[
10:8]
R/W 0h Initial parameter set values 3 Used during link-up.
2.6.46 Register 407Ch (offset = 407Ch) [reset = D0h]
Figure 2-760. Register 407Ch
7 6 5 4 3 2 1 0
LINK_INIT_VAL_4[7:0]
R/W-D0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-766. Register 407C Field Descriptions
Bit Field Type Reset Description
7-0
LINK_INIT_VAL_4[
7:0]
R/W D0h Initial parameter set values 4. Used during link-up.