Texas Instruments AFE79 Series - 2.13.77 Register 40 Dh (offset = 40 Dh) [reset = 2 h]; 2.13.78 Register 410 h (offset = 410 h) [reset = Ch]; 2.13.79 Register 414 h (offset = 414 h) [reset = 0 h]

www.ti.com RX Top Register Map
735
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-1501. Register 40C Field Descriptions
Bit Field Type Reset Description
5-0
RX_AGC_PWR_A
TTACK_STEP_SIZ
E
R/W 2h
Gain step when Digital power detector attack is triggered. 0.5
dB step size.
2.13.77 Register 40Dh (offset = 40Dh) [reset = 2h]
Figure 2-1489. Register 40Dh
7 6 5 4 3 2 1 0
RX_AGC_PWR_DECAY_STEP_SIZE
R/W-2h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1502. Register 40D Field Descriptions
Bit Field Type Reset Description
5-0
RX_AGC_PWR_D
ECAY_STEP_SIZE
R/W 2h
Gain step when Digital power detector decay is triggered. 0.5
dB step size.
2.13.78 Register 410h (offset = 410h) [reset = Ch]
Figure 2-1490. Register 410h
7 6 5 4 3 2 1 0
RX_AGC_LNARF_ATTACK_STEP_SIZE
R/W-Ch
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1503. Register 410 Field Descriptions
Bit Field Type Reset Description
5-0
RX_AGC_LNARF_
ATTACK_STEP_SI
ZE
R/W Ch Gain step when RF attack is triggered. 0.5 dB step size.
2.13.79 Register 414h (offset = 414h) [reset = 0h]
Figure 2-1491. Register 414h
7 6 5 4 3 2 1 0
RX_AGC_BIG_STEP_ATTACK_WIN_LEN[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1504. Register 414 Field Descriptions
Bit Field Type Reset Description
7-0
RX_AGC_BIG_ST
EP_ATTACK_WIN
_LEN[7:0]
R/W 0h
Digital big step attack det window length. Max supported
length is 2^24 - 2.