Texas Instruments AFE79 Series - 2.3.44 Register 53 h (offset = 53 h) [reset = 0 h]

JESD_SUBCHIP Register Map www.ti.com
186
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-87. Register 52 Field Descriptions
Bit Field Type Reset Description
7-7
TXB_B1_Q_DATA
_NEGATION
R/W 0h
Determines whether the data is to be negated or not.
0 : Normal data (No negation)
1 : 2's complement (negation)
6-6
TXB_B1_I_DATA_
NEGATION
R/W 0h
Determines whether the data is to be negated or not.
0 : Normal data (No negation)
1 : 2's complement (negation)
5-5
TXB_B0_Q_DATA
_NEGATION
R/W 0h
Determines whether the data is to be negated or not.
0 : Normal data (No negation)
1 : 2's complement (negation)
4-4
TXB_B0_I_DATA_
NEGATION
R/W 0h
Determines whether the data is to be negated or not.
0 : Normal data (No negation)
1 : 2's complement (negation)
3-3
TXA_B1_Q_DATA
_NEGATION
R/W 0h
Determines whether the data is to be negated or not.
0 : Normal data (No negation)
1 : 2's complement (negation)
2-2
TXA_B1_I_DATA_
NEGATION
R/W 0h
Determines whether the data is to be negated or not.
0 : Normal data (No negation)
1 : 2's complement (negation)
1-1
TXA_B0_Q_DATA
_NEGATION
R/W 0h
Determines whether the data is to be negated or not.
0 : Normal data (No negation)
1 : 2's complement (negation)
0-0
TXA_B0_I_DATA_
NEGATION
R/W 0h
Determines whether the data is to be negated or not.
0 : Normal data (No negation)
1 : 2's complement (negation)
2.3.44 Register 53h (offset = 53h) [reset = 0h]
Figure 2-85. Register 53h
7 6 5 4 3 2 1 0
TXD_B1_Q_DA
TA_NEGATION
TXD_B1_I_DA
TA_NEGATION
TXD_B0_Q_DA
TA_NEGATION
TXD_B0_I_DA
TA_NEGATION
TXC_B1_Q_DA
TA_NEGATION
TXC_B1_I_DA
TA_NEGATION
TXC_B0_Q_DA
TA_NEGATION
TXC_B0_I_DA
TA_NEGATION
R/W-0h R/W-0h R/W-0h R/W-0h R/W-0h R/W-0h R/W-0h R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-88. Register 53 Field Descriptions
Bit Field Type Reset Description
7-7
TXD_B1_Q_DATA
_NEGATION
R/W 0h
Determines whether the data is to be negated or not.
0 : Normal data (No negation)
1 : 2's complement (negation)
6-6
TXD_B1_I_DATA_
NEGATION
R/W 0h
Determines whether the data is to be negated or not.
0 : Normal data (No negation)
1 : 2's complement (negation)
5-5
TXD_B0_Q_DATA
_NEGATION
R/W 0h
Determines whether the data is to be negated or not.
0 : Normal data (No negation)
1 : 2's complement (negation)
4-4
TXD_B0_I_DATA_
NEGATION
R/W 0h
Determines whether the data is to be negated or not.
0 : Normal data (No negation)
1 : 2's complement (negation)
3-3
TXC_B1_Q_DATA
_NEGATION
R/W 0h
Determines whether the data is to be negated or not.
0 : Normal data (No negation)
1 : 2's complement (negation)
2-2
TXC_B1_I_DATA_
NEGATION
R/W 0h
Determines whether the data is to be negated or not.
0 : Normal data (No negation)
1 : 2's complement (negation)
1-1
TXC_B0_Q_DATA
_NEGATION
R/W 0h
Determines whether the data is to be negated or not.
0 : Normal data (No negation)
1 : 2's complement (negation)