Texas Instruments AFE79 Series User Manual

IO Wrap Register Map www.ti.com
1082
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-2557. Register 44B Field Descriptions
Bit Field Type Reset Description
3-1
ACTIV_BIR_DIR_C
TRL_GPIO_18
R/W 0h
Control to indicate whether the GPIO_18 needs dynamic
ouptu t enabling.
0 to 3 --> Static direction
4 --> Use the IO for 3 pin SPI B2 SDIO.
5 --> Use the IO for 4 pin SPI B2 SDO
6 --> Use the IO for 3 pin SPI B1 SDIO.
7 --> use the IO for 4 pin SPI B1 SDO.
0-0 reserved R/W 0h
2.16.279 Register 44Ch (offset = 44Ch) [reset = 1h]
Figure 2-2542. Register 44Ch
7 6 5 4 3 2 1 0
reserved reserved BUF_DIR_CTRL_GPIO_19
R/W-0h R/W-0h R/W-1h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2558. Register 44C Field Descriptions
Bit Field Type Reset Description
7-5 reserved R/W 0h
4-2 reserved R/W 0h
1-0
BUF_DIR_CTRL_G
PIO_19
R/W 1h
Controls the direction of GPIO
0 both input and output are not selected.. can be used for
analog
1 input mode
2 output mode
3 shouldnt be used
2.16.280 Register 44Fh (offset = 44Fh) [reset = 0h]
Figure 2-2543. Register 44Fh
7 6 5 4 3 2 1 0
ACTIV_BIR_DIR_CTRL_GPIO_19 reserved
R/W-0h R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2559. Register 44F Field Descriptions
Bit Field Type Reset Description
3-1
ACTIV_BIR_DIR_C
TRL_GPIO_19
R/W 0h
Control to indicate whether the GPIO_19 needs dynamic
ouptu t enabling.
0 to 3 --> Static direction
4 --> Use the IO for 3 pin SPI B2 SDIO.
5 --> Use the IO for 4 pin SPI B2 SDO
6 --> Use the IO for 3 pin SPI B1 SDIO.
7 --> use the IO for 4 pin SPI B1 SDO.
0-0 reserved R/W 0h

Texas Instruments AFE79 Series Specifications

General

Brand	Texas Instruments
Model	AFE79 Series
Category	Control Unit
Language	English