EasyManua.ls Logo

Texas Instruments AFE79 Series - 2.14.83 Register 41 Eh (offset = 41 Eh) [reset = 0 h]; 2.14.84 Register 420 h (offset = 420 h) [reset = 0 h]; 2.14.85 Register 421 h (offset = 421 h) [reset = 80 h]; 2.14.86 Register 422 h (offset = 422 h) [reset = 0 h]

Texas Instruments AFE79 Series
1268 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FB Top Register Map
www.ti.com
886
SBAU337May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
2.14.83 Register 41Eh (offset = 41Eh) [reset = 0h]
Figure 2-1966. Register 41Eh
7 6 5 4 3 2 1 0
FB_AGC_BIG_STEP_DECAY_WIN_LEN[23:16]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1980. Register 41E Field Descriptions
Bit Field Type Reset Description
7-0
FB_AGC_BIG_STE
P_DECAY_WIN_L
EN[23:16]
R/W 0h
Digital big step decay det window length. Max supported
length is 2^24 - 2.
2.14.84 Register 420h (offset = 420h) [reset = 0h]
Figure 2-1967. Register 420h
7 6 5 4 3 2 1 0
FB_AGC_SMALL_STEP_DECAY_WIN_LEN[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1981. Register 420 Field Descriptions
Bit Field Type Reset Description
7-0
FB_AGC_SMALL_
STEP_DECAY_WI
N_LEN[7:0]
R/W 0h
Digital small step decay det window length. Max supported
length is 2^24 - 2.
2.14.85 Register 421h (offset = 421h) [reset = 80h]
Figure 2-1968. Register 421h
7 6 5 4 3 2 1 0
FB_AGC_SMALL_STEP_DECAY_WIN_LEN[15:8]
R/W-80h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1982. Register 421 Field Descriptions
Bit Field Type Reset Description
7-0
FB_AGC_SMALL_
STEP_DECAY_WI
N_LEN[15:8]
R/W 80h
Digital small step decay det window length. Max supported
length is 2^24 - 2.
2.14.86 Register 422h (offset = 422h) [reset = 0h]
Figure 2-1969. Register 422h
7 6 5 4 3 2 1 0
FB_AGC_SMALL_STEP_DECAY_WIN_LEN[23:16]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset

Table of Contents

Related product manuals