Texas Instruments AFE79 Series - 2.12.103 Register 505 h (offset = 505 h) [reset = 0 h]; 2.12.104 Register 510 h (offset = 510 h) [reset = 0 h]; 2.12.105 Register 511 h (offset = 511 h) [reset = 0 h]

TX Top Register Map www.ti.com
664
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
2.12.103 Register 505h (offset = 505h) [reset = 0h]
Figure 2-1306. Register 505h
7 6 5 4 3 2 1 0
TX_PAP_RAMP_MULT_DATA[13:8]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1318. Register 505 Field Descriptions
Bit Field Type Reset Description
5-0
TX_PAP_RAMP_M
ULT_DATA[13:8]
R/W 0h
Data input to PA protection ramp multiplier on selecting
tx_pap_ramp_mult_data_mode==0
2.12.104 Register 510h (offset = 510h) [reset = 0h]
Figure 2-1307. Register 510h
7 6 5 4 3 2 1 0
TX_DUAL_BAN
D_COMBINER
_PAP_MODE_
MOVING_AVE
RAGE_EN
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1319. Register 510 Field Descriptions
Bit Field Type Reset Description
0-0
TX_DUAL_BAND_
COMBINER_PAP_
MODE_MOVING_
AVERAGE_EN
R/W 0h
Enable the Moving Average (MA) mode in dual band combiner
PA Protection detector
0:Disable:
1:Enable:
2.12.105 Register 511h (offset = 511h) [reset = 0h]
Figure 2-1308. Register 511h
7 6 5 4 3 2 1 0
TX_DUAL_BAND_COMBINER_
PAP_MOVING_AVERAGE_SAM
PLES
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1320. Register 511 Field Descriptions
Bit Field Type Reset Description
1-0
TX_DUAL_BAND_
COMBINER_PAP_
MOVING_AVERAG
E_SAMPLES
R/W 0h
Dual band combiner PA Prorection Moving Average sample
count. The averaging count is in the range 16 to 128 samples
according to the configuration:
0:16:
1:32:
2:64:
3:128: