EasyManua.ls Logo

Texas Instruments AFE79 Series - 2.12.154 Register 55 Dh (offset = 55 Dh) [reset = 0 h]; 2.12.155 Register 55 Eh (offset = 55 Eh) [reset = 0 h]

Texas Instruments AFE79 Series
1268 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.ti.com
TX Top Register Map
681
SBAU337May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-1368. Register 55C Field Descriptions
Bit Field Type Reset Description
7-0
TX_PAP_OTHER_
TX_PAP_ALARM_
STATUS[7:0]
R 0h
Masked Alarm status bits of PAP TxA input & detection
alarms. Value 1 = Trigger, Value 0 = NoTrigger.
bit [0] :PLL Alarm
bit [5]: JESD Serdes Alarm
bit [6]: Async FIFO Overflow Alarm
bit [7]: Saturation Overflow Alarm
bit [8]: Dual/Single band Alarm
bit [9]: PAP dual band combiner alarm
bit[10]: FW/SPI triggered alarm
Remaining: Unused
2.12.154 Register 55Dh (offset = 55Dh) [reset = 0h]
Figure 2-1357. Register 55Dh
7 6 5 4 3 2 1 0
TX_PAP_OTHER_TX_PAP_ALARM_STATUS[10:
8]
R-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1369. Register 55D Field Descriptions
Bit Field Type Reset Description
2-0
TX_PAP_OTHER_
TX_PAP_ALARM_
STATUS[10:8]
R 0h
Masked Alarm status bits of PAP TxA input & detection
alarms. Value 1 = Trigger, Value 0 = NoTrigger.
bit [0] :PLL Alarm
bit [5]: JESD Serdes Alarm
bit [6]: Async FIFO Overflow Alarm
bit [7]: Saturation Overflow Alarm
bit [8]: Dual/Single band Alarm
bit [9]: PAP dual band combiner alarm
bit[10]: FW/SPI triggered alarm
Remaining: Unused
2.12.155 Register 55Eh (offset = 55Eh) [reset = 0h]
Figure 2-1358. Register 55Eh
7 6 5 4 3 2 1 0
TX_PAP_OTHER_TX_PAP_UNMASK_STATUS[7:0]
R-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1370. Register 55E Field Descriptions
Bit Field Type Reset Description
7-0
TX_PAP_OTHER_
TX_PAP_UNMASK
_STATUS[7:0]
R 0h
Unmasked Alarm status bits of PAP TxA input & detection
alarms. Value 1 = Trigger, Value 0 = NoTrigger.
bit [0] :PLL Alarm
bit [5]: JESD Serdes Alarm
bit [6]: Async FIFO Overflow Alarm
bit [7]: Saturation Overflow Alarm
bit [8]: Dual/Single band Alarm
bit [9]: PAP dual band combiner alarm
bit[10]: FW/SPI triggered alarm
Remaining: Unused

Table of Contents

Related product manuals