Texas Instruments AFE79 Series - 2.14.7 Register 60 h (offset = 60 h) [reset = 44 h]; 2.14.8 Register 61 h (offset = 61 h) [reset = 44 h]; 2.14.9 Register 70 h (offset = 70 h) [reset = 1 h]; 2.14.10 Register A0 h (offset = A0 h) [reset = 0 h]

FB Top Register Map www.ti.com
862
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
2.14.7 Register 60h (offset = 60h) [reset = 44h]
Figure 2-1890. Register 60h
7 6 5 4 3 2 1 0
FB_DDC_ASYNC_FIFO_CONFIG0
R/W-44h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1904. Register 60 Field Descriptions
Bit Field Type Reset Description
7-0
FB_DDC_ASYNC_
FIFO_CONFIG0
R/W 44h
Pointer offset value.
Valid range: 0 to 15
2.14.8 Register 61h (offset = 61h) [reset = 44h]
Figure 2-1891. Register 61h
7 6 5 4 3 2 1 0
FB_DDC_ASYNC_FIFO_CONFIG1
R/W-44h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1905. Register 61 Field Descriptions
Bit Field Type Reset Description
7-0
FB_DDC_ASYNC_
FIFO_CONFIG1
R/W 44h
Pointer offset value.
Valid range: 0 to 15
2.14.9 Register 70h (offset = 70h) [reset = 1h]
Figure 2-1892. Register 70h
7 6 5 4 3 2 1 0
FB_DDC_NYQ_CONFIG
R/W-1h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1906. Register 70 Field Descriptions
Bit Field Type Reset Description
2-0
FB_DDC_NYQ_CO
NFIG
R/W 1h
ADC Nyquist zone select.
Valid range: 1 through 6
2.14.10 Register A0h (offset = A0h) [reset = 0h]
Figure 2-1893. Register A0h
7 6 5 4 3 2 1 0
FB_DDC_NCO0_FCW[7:0]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset