Texas Instruments AFE79 Series - 2.13.18 Register A5 h (offset = A5 h) [reset = 0 h]; 2.13.19 Register A6 h (offset = A6 h) [reset = 0 h]; 2.13.20 Register A7 h (offset = A7 h) [reset = 0 h]

RX Top Register Map www.ti.com
716
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-1442. Register A4 Field Descriptions
Bit Field Type Reset Description
7-0
RX_DDC_BAND0_
NCO1_FCW[7:0]
R/W 0h
Frequency control word (FCW) for nco1 of band0.
The System Configuration Macros automatically configure this.
2.13.18 Register A5h (offset = A5h) [reset = 0h]
Figure 2-1430. Register A5h
7 6 5 4 3 2 1 0
RX_DDC_BAND0_NCO1_FCW[15:8]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1443. Register A5 Field Descriptions
Bit Field Type Reset Description
7-0
RX_DDC_BAND0_
NCO1_FCW[15:8]
R/W 0h
Frequency control word (FCW) for nco1 of band0.
The System Configuration Macros automatically configure this.
2.13.19 Register A6h (offset = A6h) [reset = 0h]
Figure 2-1431. Register A6h
7 6 5 4 3 2 1 0
RX_DDC_BAND0_NCO1_FCW[23:16]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1444. Register A6 Field Descriptions
Bit Field Type Reset Description
7-0
RX_DDC_BAND0_
NCO1_FCW[23:16]
R/W 0h
Frequency control word (FCW) for nco1 of band0.
The System Configuration Macros automatically configure this.
2.13.20 Register A7h (offset = A7h) [reset = 0h]
Figure 2-1432. Register A7h
7 6 5 4 3 2 1 0
RX_DDC_BAND0_NCO1_FCW[31:24]
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-1445. Register A7 Field Descriptions
Bit Field Type Reset Description
7-0
RX_DDC_BAND0_
NCO1_FCW[31:24]
R/W 0h
Frequency control word (FCW) for nco1 of band0.
The System Configuration Macros automatically configure this.