Texas Instruments AFE79 Series User Manual

www.ti.com IO Wrap Register Map
1039
SBAU337–May 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Serial Interface Register Maps
Table 2-2421. Register 2BC Field Descriptions
Bit Field Type Reset Description
2-0
PULL_CTRL_GPIO
_47
R/W 1h
Bit 0 indicates Pull up enable.
Bit <1> Indicates Pull value.
Bit <2> is unused.
2.16.143 Register 2BDh (offset = 2BDh) [reset = 2h]
Figure 2-2406. Register 2BDh
7 6 5 4 3 2 1 0
IBUF_ST_GPIO_47
R/W-2h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2422. Register 2BD Field Descriptions
Bit Field Type Reset Description
1-0
IBUF_ST_GPIO_4
7
R/W 2h Input buffer signal strength
2.16.144 Register 2BEh (offset = 2BEh) [reset = 0h]
Figure 2-2407. Register 2BEh
7 6 5 4 3 2 1 0
ODRIV_DS_GPIO_47
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2423. Register 2BE Field Descriptions
Bit Field Type Reset Description
1-0
ODRIV_DS_GPIO_
47
R/W 0h output buffer drive strength.
2.16.145 Register 2C0h (offset = 2C0h) [reset = 1h]
Figure 2-2408. Register 2C0h
7 6 5 4 3 2 1 0
PULL_CTRL_GPIO_48
R/W-1h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Table 2-2424. Register 2C0 Field Descriptions
Bit Field Type Reset Description
2-0
PULL_CTRL_GPIO
_48
R/W 1h
Bit 0 indicates Pull up enable.
Bit <1> Indicates Pull value.
Bit <2> is unused.

Texas Instruments AFE79 Series Specifications

General

Brand	Texas Instruments
Model	AFE79 Series
Category	Control Unit
Language	English