102 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Accessing the Switch
Secondary EW Ver: 7.1.0b34 [non-ssh]
Module Image Selected Image Booted
------ -------------- ------------
SMM Secondary Secondary
Slot 2 (WM4T1) Secondary Secondary
Config Selected: Primary
Config Booted: Primary
Primary Config: Created by EW Version:
7.1.0 Build 34 [38]
7928 bytes saved on Wed Jun 4 11:54:03 2003
Secondary Config: Created by EW Version:
6.2.2 Build 56 [38]
2900 bytes saved on Thu Jan 30 04:21:10 2003
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 6.1.8 to display the mode of switch operation—extended,
standard, or auto—for the Alpine 3802.
This command was modified in ExtremeWare 7.0.0.
This command was modified in ExtremeWare 7.3.0 to add an indicator for default configuration mode
(standard or enhanced)
Platform Availability
This command is available on all platforms.
To Next Page