show mpls ldp acl
ExtremeWare Software 7.3.0 Command Reference Guide 1981
show mpls ldp acl
show mpls ldp acl {<ipaddress> | <host_name>}
Description
Displays the list of configured LDP ACL entries.
Syntax Description
Default
N/A.
Usage Guidelines
This command displays the list of configured LDP ACL entries. Optionally, a specific LDP ACL can be
displayed by specifying the ipaddress or host_name for the configured ACL.
Example
None.
History
This command was first available in an ExtremeWare 7.3.0.
Platform Availability
This command is available on the BlackDiamond switch.
ipaddress Specifies the IP address for a specific LDP ACL.
host_name Specifies the host name for a specific LDP ACL.
To Next Page
Loading...