Extreme Networks ExtremeWare - Disable Bgp Neighbor Soft-In-Reset

disable bgp neighbor soft-in-reset
ExtremeWare Software 7.3.0 Command Reference Guide 1459
disable bgp neighbor soft-in-reset
disable bgp neighbor [all | <ip address>] soft-in-reset
Description
Disables the soft input reset feature.
Syntax Description
Default
Disabled.
Usage Guidelines
Disabling the soft input reset feature can potentially limit the amount of system memory consumed by
the RIB-in.
Example
The following command disables the soft input reset feature:
disable bgp neighbor 192.168.1.17 soft-in-reset
History
This command was available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
all Specifies all neighbors.
ip address Specifies an IP address.