Extreme Networks ExtremeWare - Show Snmpv3 Filter-Profile

show snmpv3 filter-profile
ExtremeWare Software 7.3.0 Command Reference Guide 203
show snmpv3 filter-profile
show snmpv3 filter-profile {{hex} <profile name>} {param {hex}
<param
name>}
Description
Display the association between parameter names and filter profiles.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to display the snmpNotifyFilterProfileTable. This table associates a filter profile with
a parameter name. The parameter name is associated with target addresses, and the filter profile is
associated with a series of filters, so, in effect, you are associating a series of filters with a target address.
Example
Use the following command to display the entry with filter profile prof1 with the parameter name P1:
show snmpv3 filter-profile prof1 param P1
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
profile name Specifies the filter profile name.
param name Specifies the parameter name.