Extreme Networks ExtremeWare - Configure Mpls Delete Tls-Tunnel

1764 ExtremeWare Software 7.3.0 Command Reference Guide
MPLS Commands
configure mpls delete tls-tunnel
configure mpls delete tls-tunnel [<tunnel_name> | group <groupid> | all]
Description
Deletes one or all TLS tunnels.
Syntax Description
Default
N/A.
Usage Guidelines
This command deletes the TLS tunnel with the specified tunnel name. Specify the <groupid> if you
want to delete all TLS tunnels belonging to a specific group. Specify the
<groupid> if you want to
delete all TLS tunnels belonging to a specific group. Use the
all keyword to delete all TLS tunnels.
Example
The following command deletes the TLS tunnel rt40:
configure mpls delete tls-tunnel rt40
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
tunnel_name Specifies a TLS tunnel name.
group <groupid> Specifies a group identifier
all Specifies all TLS tunnels.