902 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
enable netlogin ports
enable netlogin ports <portlist> vlan <vlan name>
Description
Enables Network Login on a specified port in a VLAN.
Syntax Description
Default
N/A.
Usage Guidelines
The VLAN you specify must exist and include the specified ports prior to enabling Network Login.
For campus mode login with web-based clients, the following conditions must be met:
• A DHCP server must be available, and a DHCP range must be configured for the port or ports in the
VLAN on which you want to enable Network Login.
• The switch must be configured as a RADIUS client, and the RADIUS server must be configured to
enable the Extreme Network Login capability.
For ISP mode login, no special conditions are required. A RADIUS server must be used for
authentication.
Network Login is used on a per port, per VLAN basis. A port that is tagged can belong to more than
one VLAN. In this case, Network Login can be enabled on one port for each VLAN.
Windows authentication is not supported via Network Login.
Example
The following command configures Network Login on port 9 in VLAN corp:
enable netlogin ports 9 vlan corp
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
portlist Specifies the ports for which netlogin should be enabled.
vlan name Specifies the VLAN on whose ports netlogin should be enabled.
To Next Page
Loading...