208 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Managing the Switch
show snmpv3 target-addr-ext
show snmpv3 target-addr-ext {hex} <addr name>
Description
Display information about SNMPv3 target addresses enhanced or standard mode.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to display entries in the SNMPv3 extremeTargetAddressExtTable.
Example
The following command displays the entry for the target address named A1:
show snmpv3 target-addr-ext A1
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
addr name Specifies a string identifier for the target address.
To Next Page
Loading...
Need help?
General
