1812 ExtremeWare Software 7.3.0 Command Reference Guide
MPLS Commands
configure vlan delete track-lsp
configure vlan <vlan name> delete track-lsp [<lsp_name> | ipaddress
<ipaddress>/<masklength> | all]
Description
Disables LSP route tracking for an ESRP-enabled VLAN.
Syntax Description
Default
N/A.
Usage Guidelines
The
delete track
-
lsp
command removes an LSP from ESRP tracking for the specified VLAN. If you
specify the
all
keyword, all configured LSPs are removed from ESRP tracking for the specified VLAN.
Example
The following command disables diagnostic failure tracking for VLAN esrp-1:
configure vlan esrp-1 delete track-lsp
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
vlan name Specifies an ESRP-enabled VLAN name.
lsp_name Specifies a LSP name.
ipaddress Specifies the IP address of the route entry to be tracked.
all Specifies all LSPs.
To Next Page
Loading...
Need help?
General
