enable tacacs
ExtremeWare Software 7.3.0 Command Reference Guide 907
enable tacacs
enable tacacs
Description
Enables TACACS+ authentication.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
After they have been enabled, all web and CLI logins are sent to one of the two TACACS+ servers for
login name authentication and accounting.
Example
The following command enables TACACS+ user authentication:
enable tacacs
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...