1158 ExtremeWare Software 7.3.0 Command Reference Guide
IP Unicast Commands
configure iparp max-entries
configure iparp max-entries <number>
Description
Configures the maximum allowed IP ARP entries.
Syntax Description
Default
4096.
Usage Guidelines
Range: 1 - 20480. The maximum IP ARP entries include dynamic, static, and incomplete IP ARP
entries.
Example
The following command sets the maximum IP ARP entries to 2000 entries:
configure iparp max-entries 2000
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
number Specifies a number of maximum IP ARP entries.
To Next Page
Loading...