Extreme Networks ExtremeWare User Manual

configure snmpv3 delete target-addr
ExtremeWare Software 7.3.0 Command Reference Guide 151
configure snmpv3 delete target-addr
configure snmpv3 delete target-addr [{{hex} <addr name>} | all]
Description
Delete SNMPv3 target addresses.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to delete an entry in the SNMPv3 snmpTargetAddressTable.
Example
The following command deletes target address named A1:
configure snmpv3 delete target-addr A1
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
addr name Specifies a string identifier for the target address.
all Specifies all target addresses.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English