204 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Managing the Switch
show snmpv3 group
show snmpv3 group {{hex} <group name> {user {hex} <user name>}}
Description
Displays the user name (security name) and security model association with a group name.
Syntax Description
Default
N/A.
Usage Guidelines
The
show snmpv3 group
command displays the details of a group with the given group name. If you
do not specify a group name, the command will display details for all the groups.
Example
The following command displays information about all groups for every security model and user name:
show snmpv3 group
The following command shows information about the group testgroup and user name testuser:
show snmpv3 group testgroup user testuser
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
group name Specifies the group name to display.
user name Specifies the user name to display.
To Next Page
Loading...
Need help?
General
